SUDO

The key your coding agent needs.

Say it, it goes. Press it, it acts.

Join the Xiaohongshu group
SUDO seen from the front, screen lit

The screen shows what it is doing right now

01NEEDS YOU

When it's your call, it calls you.

Before your agent acts, SUDO beeps, buzzes and puts the command on screen.
No hunting for the window.

$ claude
● Reading src/auth/login.ts…
● Bash(git push --force origin main)
  ┊ Do you want to proceed?
    ❯ 1. Yes
      2. Yes, and don't ask again
      3. No
// asked 3 minutes ago. you were in another tab
A SUDO keyboard, one command waiting for approval on its screen

02LISTENING

Press softly. Speak slowly.

Tap to start, tap again to stop.
Your words land in the input box.

TRANSCRIBE · POLISH · INSERT

The SUDO screen while it listens, a waveform running across it

03NEEDS YOU

Push it through. That's a yes.

Dangerous work: push through stage two, hold 1.5 seconds, feel the buzz.
A brush of the finger is nothing.

Close-up of the main key going down
NEEDS YOU
git push --force
origin/main · 3 commits ahead
PRESS DEEP TO APPROVE
2 stagesLight and deep are two different places under your finger
≥1.5sHolding counts. Brushing it doesn't
bzzYou feel the moment it lands
ALL-NEW · Two-stage key

1 = 2

One key, two stops. Tap to talk. Push through to approve.
Stage two takes three times the force. Your finger knows, and so does your agent.

MAIN KEY · TWO-STAGEMAIN KEY · TWO-STAGETWO STAGES
REST STAGE 1LIGHT · SPEAK STAGE 2THROUGH · APPROVE ×3 FORCE ▲ tap → rest at stage one → push through Not harder. Deeper.

IN-HOUSE · STABILIZER

A new stabilizer, for one key.

Hit any corner. It still goes down flat.

The stabilizer, with a translucent coral keycap over it
The layers of the main key

EXPLODED VIEW

What's inside one key.

Keycap, stabilizer, two switches, board.

  • 01Keycap
  • 02Stabilizer
  • 03First-stage switch
  • 04Second-stage switch
  • 05Board
SESSION · main RUNNING
Task progress on the device screen

04RUNNING

Status on your desk, not in a tab.

Running, waiting, done, failed. One glance.

Take a closer look.

SUDO body taken apart: bezel, top shell, board, base
Exploded view of the main key stack
Stabilizer taken apart: keycap, guide, crank, both stages
Strip display taken apart: bezel, glass, display, adapter board
The three keys taken apart: caps and switches
Knob taken apart: knob, encoder, mount
SUDO from above and from the side, with dimensions
SUDO from above and from the side, with dimensions

SUDODesk, wired into your agent.

Plug it in over USB. It sits in your tray.
Pick your agent. SUDO becomes its controller.

Go to downloads

The cat in your tray is lit. It's connected.

118×95.9×20.6mm
4″ 960×400WIDE STRIP DISPLAY
USB-CWIRED, NO DRIVER
ESP32-S3N16R8
Tech specs →

06IN THE WORKS

Want one first? Leave your email.

Still building. One email when it ships.

Xiaohongshu / 机箱上的猫x / @goyoungstudioPRE-ORDER · SOON
Xiaohongshu group · Cat on the case